Windows: adding routes

To view the existing routes,

C:\> route print

To add a static route,


C:\> route add <target> mask <netmask> <gateway IP> metric <metric cost> if <interface>


C:\> route add mask metric 1

Note: If there is more than one Network Interface and if the interface is not mentioned, the interface is selected based on the gateway IP.

This Static route gets erased when the system reboots. To avoid this, use the -p (Persistent) switch to the above command:

C:\> route -p add mask metric 1

This writes the persistent route to the following Windows Registry key as a string value (REG_SZ):


Also, you can write a small batch file with the route commands and add it to the startup folder to add the routes at startup (similar to the startup scripts in Solaris)


Related Posts

Share This